Flooring and backsplash
Kitchen Flooring Options Compared
A kitchen floor has to cope with spills, dropped objects, grit from outside and long periods of standing. It also has to work with the cabinets and appliances that sit on it or beside it.
This guide compares the common kitchen flooring materials, explains the subfloor and height issues that affect installation, and covers the question of whether flooring goes under the cabinets. Product performance varies, and each manufacturer's installation instructions set the requirements for subfloor flatness, moisture and expansion gaps.
Comparison of kitchen flooring materials
| Material | Water resistance | Comfort and feel | Relative cost installed |
|---|---|---|---|
| Porcelain or ceramic tile | Excellent. Grout joints need sealing or a stain-resistant grout. | Hard and cold underfoot, unforgiving to dropped dishes | Moderate to high |
| Luxury vinyl plank or tile | Very good to excellent. Many products are waterproof at the surface. | Slightly resilient and warmer than tile | Low to moderate |
| Sheet vinyl | Excellent, few or no seams | Soft and warm | Low |
| Solid hardwood | Fair. Tolerates wiped-up spills but not standing water. | Warm, can be refinished several times | Moderate to high |
| Engineered hardwood | Fair, more dimensionally stable than solid wood | Similar to hardwood. Refinishing depends on wear layer thickness. | Moderate to high |
| Laminate | Fair to good. Water-resistant lines exist, but seams and edges remain the weak point. | Hard surface with some give from the underlayment | Low to moderate |
| Cork | Fair. Needs a sealed finish. | Soft, quiet and warm, dents under heavy point loads | Moderate |
| Natural stone | Good when sealed, varies by stone | Hard and cold, heavy | High |
Tile flooring
Porcelain tile is dense, absorbs almost no water and resists scratches and stains. It is the most durable common kitchen floor. Its drawbacks are hardness, coldness without radiant heat, and grout lines that need cleaning.
Tile needs a stiff, flat substrate. A wood-framed floor that flexes will crack tile or grout. The common industry standard for ceramic tile is a floor deflection of no more than 1/360 of the joist span, with a stricter figure for natural stone. Tile is set over cement backer board or an uncoupling membrane, not directly on plywood in most methods. Large-format tiles need an especially flat surface.
For slip resistance, look for tile rated for wet floor use. Matte and textured finishes are less slippery than polished ones. Narrow grout joints and a stain-resistant or epoxy grout reduce maintenance.
Vinyl and laminate flooring
Luxury vinyl plank and tile have become a common kitchen choice because they are water resistant, comfortable and relatively easy to install. Products with a rigid core click together as a floating floor. Flexible products are glued down. The wear layer, measured in mils, indicates durability. About 12 mils is typical for homes, and 20 mils or more is used for heavy wear.
Vinyl can be dented by heavy appliances and scratched by grit, and it can fade or expand in strong direct sunlight. A waterproof surface does not protect the subfloor if water gets under the planks at the edges or through a long-term leak.
Laminate has a printed layer over a fiberboard core. It resists scratches well, but water that reaches the core through seams causes swelling that cannot be repaired. Water-resistant laminates improve on this for a stated period of exposure. Both materials float over the subfloor and need an expansion gap at the walls.
Wood flooring
Hardwood is widely used in kitchens, particularly in open plans where the same floor continues into living areas. It is comfortable to stand on and can be refinished. It is also the material most sensitive to water. Leaks from a dishwasher, an ice maker line or the sink can cause cupping and staining, so prompt cleanup and a leak detector near appliances are sensible precautions.
Site-finished hardwood has a continuous finish over the seams between boards, which helps against surface spills. Prefinished boards have a very hard factory finish but small beveled joints that can hold liquid. Engineered hardwood has a real wood surface over a plywood or composite core and moves less with humidity, which makes it suitable over concrete slabs and radiant heat when the manufacturer allows it.
Subfloor, height and transitions
- Flatness: most floating floors require the subfloor to be flat within about 3/16 inch over 10 feet. Tile requirements are tighter for large tiles.
- Moisture: concrete slabs should be tested for moisture before wood, laminate or glued vinyl is installed.
- Finished height: tile over backer board adds roughly 1/2 to 3/4 inch. Vinyl plank adds about 3/16 to 3/8 inch. Solid hardwood adds about 3/4 inch.
- Transitions: a change in height at doorways needs a reducer or threshold strip. Differences over about 1/2 inch are a trip hazard and are worth designing out.
- Existing layers: old vinyl flooring and adhesives installed before the 1980s can contain asbestos. They should be tested before sanding, scraping or removal, and handled according to local rules.
- Appliances: check that the finished floor height leaves the required opening height for the dishwasher and the range.
Flooring under cabinets and appliances
Whether the floor runs under the base cabinets depends on the material. Tile and nailed or glued hardwood are commonly installed wall to wall before the cabinets, or at least under the appliance openings. This keeps the counter height consistent relative to the floor and allows a future layout change.
Floating floors, including click-together vinyl plank, laminate and floating engineered wood, should not be pinned under cabinets or a heavy island, because the floor must be free to expand and contract. They are installed after the cabinets, up to the toe kick, with the gap covered by trim. Where a floating floor stops at the cabinets, the cabinets are often raised on plywood of the same thickness so the dishwasher opening is not shortened.
In every case the flooring should continue under the refrigerator, the range and the dishwasher space so that appliances can slide out for service.
Common kitchen flooring mistakes
- Laying tile over a floor that flexes or is not flat
- Trapping the dishwasher by raising the floor in front of it
- Installing cabinets or an island on top of a floating floor
- Skipping the moisture test on a concrete slab
- Leaving no expansion gap at walls and fixed objects
- Choosing a polished, slippery surface for a room that gets wet
- Disturbing old flooring without testing it for asbestos
- Not ordering extra material. About 10 percent over the measured area is typical for cuts and future repairs.
Frequently asked questions
What is the most durable kitchen flooring?
Porcelain tile is generally the most resistant to water, scratches and stains. Its durability depends on a stiff, flat subfloor and a correct installation. Quality luxury vinyl is the next most water-tolerant option and is more comfortable underfoot.
Is hardwood flooring a good choice for a kitchen?
It can be, and many kitchens have it. It needs spills wiped up promptly and is vulnerable to appliance leaks. Households that want the lowest risk from water usually choose tile or vinyl.
Should flooring be installed before or after kitchen cabinets?
Tile and fastened hardwood are often installed before cabinets. Floating floors such as click vinyl plank and laminate are installed after, because they must not be pinned under cabinets. In all cases the floor should extend into the appliance openings.
Is luxury vinyl plank waterproof?
Many products are waterproof in the sense that the planks themselves are not damaged by water. Water can still pass through joints and edges to the subfloor, so spills and leaks should be dealt with promptly.
How much extra flooring should be ordered?
About 10 percent over the measured area is typical. Diagonal layouts, patterned tile and rooms with many cuts can need 15 percent. Keeping a few spare pieces from the same production lot makes later repairs easier to match.