KITCHEN MASTERS

Cabinets

Cabinet Refacing vs Replacing

Updated November 19, 2026

Existing kitchen cabinets can be updated in three ways: repainting or refinishing them, refacing them with new doors and veneer, or replacing them. The right choice depends mainly on the condition of the cabinet boxes and on whether the layout is changing.

This guide explains each option, compares cost and disruption in relative terms, and describes how to inspect existing cabinets. Prices vary by region and by product, so the comparisons below are approximate.

What each option involves

Repainting or refinishing keeps the existing doors, drawer fronts and boxes. The surfaces are cleaned, deglossed or sanded, primed and coated. Doors are usually removed and sprayed off site or in a temporary spray area. Hardware can be replaced at the same time.

Refacing keeps the cabinet boxes and replaces what is visible. New doors and drawer fronts are installed, and the face frames and exposed ends are covered with matching wood veneer or laminate. Hinges are replaced, and drawer boxes and slides can be upgraded as an option.

Replacing removes the existing cabinets completely. New cabinets are installed, which also allows changes to the layout, the cabinet sizes, the storage and the countertop.

Comparison of the three options

FactorRepaint or refinishRefaceReplace
Relative costLowestOften 30 to 50 percent less than comparable new cabinetsHighest
Time the kitchen is disruptedSeveral days to 2 weeksUsually 2 to 5 days on siteSeveral weeks with countertops
Door style can changeNoYesYes
Layout can changeNoOnly minor additionsYes
Interior of boxesUnchangedUnchanged unless drawers are upgradedNew
Existing countertopStaysUsually staysUsually replaced

The cost gap between refacing and replacing narrows as options are added. Refacing with new drawer boxes, soft-close slides, pull-outs and several added cabinets can approach the price of new stock or lower-priced semi-custom cabinets.

Inspecting the existing cabinet boxes

Refacing or repainting only makes sense if the boxes are sound. Check the following before getting quotes:

  • Box material: plywood or solid face frames in good condition are suitable. Thin particleboard that is crumbling or swollen is not.
  • Water damage: look at the sink base floor and sides, the cabinet beside the dishwasher and the toe kicks for swelling, staining or mold.
  • Face frames: joints should be tight and the frame firmly attached to the box.
  • Shelves: check for sagging and for stripped shelf-pin holes.
  • Drawers: boxes should be square and the joints intact. Worn slides can be replaced, but damaged drawer boxes add cost.
  • Attachment: cabinets should be solidly fastened to the wall, level, and not pulling away.
  • Odor or pest damage inside the boxes

If one or two cabinets fail this check, they can be replaced individually and refaced to match the others.

When refacing is a reasonable choice

Refacing fits best when the layout already works, the boxes are structurally sound, and the main complaint is the look of the doors. It is also practical when the existing countertop is staying, since new cabinets usually mean removing the countertop, and stone tops often cannot be reinstalled without risk of breakage.

Refacing does not fix functional problems. Narrow cabinets stay narrow, a poorly placed dishwasher stays where it is, and the shelf interiors look the same as before. If the kitchen needs more storage or better access, much of that requires new or modified boxes.

When replacing is the better choice

  • The layout is changing, or appliances of a different size are being installed
  • Boxes have water damage, sagging shelves or failing joints
  • The countertop is being replaced anyway and the budget allows new cabinets
  • Base cabinets with shelves are to be converted mostly to drawers
  • The cabinets are an unusual depth or height that limits appliance and countertop options
  • Walls or floors are being opened for plumbing or electrical work

Replacement also exposes the walls and floor behind the cabinets, which is the practical time to update wiring, add outlets, repair plumbing and fix flooring gaps.

Repainting existing cabinets

Paint is the least expensive way to change cabinet color, and the result depends heavily on preparation. Kitchen cabinets carry years of grease, and paint does not bond to a surface that has not been thoroughly cleaned and scuffed or primed with a bonding primer. A sprayed catalyzed or cabinet-grade enamel finish holds up better than wall paint applied with a brush.

Solid wood and MDF doors take paint well. Thermofoil and laminate doors are difficult to paint durably, and peeling thermofoil cannot be repaired by painting over it. Oak and other open-grain woods will show grain texture through paint unless a grain filler is used. In homes built before 1978, existing finishes may contain lead, and sanding them calls for lead-safe work practices.

Common mistakes when choosing between refacing and replacing

  • Refacing boxes that have water damage or weak joints
  • Refacing and then replacing the countertop and layout a few years later, paying twice
  • Comparing a refacing quote with drawer upgrades against a new-cabinet quote without them, or the reverse
  • Assuming a new stone countertop can go on old cabinets without checking that they are level and strong enough
  • Painting over grease or glossy finish without proper cleaning and primer
  • Not asking what material covers the face frames and how its edges are finished
  • Overlooking that new full overlay doors may not fit old face frames without changes to hinges and spacing

Frequently asked questions

Is refacing cheaper than replacing cabinets?

Usually. Refacing commonly costs 30 to 50 percent less than replacing with comparable new cabinets, partly because the countertop and plumbing can stay in place. The savings shrink when new drawer boxes, pull-outs and additional cabinets are added.

How long does cabinet refacing last?

With sound boxes and good materials, refaced cabinets can last 15 to 20 years or more, similar to new doors on new cabinets. The lifespan depends on the door material, the veneer adhesive and the condition of the original boxes.

Can the countertop stay during refacing?

Yes. Refacing works on the visible fronts and sides of the cabinets, so the countertop, sink and appliances normally stay in place. This is one of the main reasons homeowners choose it.

Can cabinets be added or changed during refacing?

Small changes are common, such as adding an island, a pantry cabinet or a cabinet over the refrigerator, built new and finished to match. Moving the sink or range or resizing most cabinets is a layout change and generally points toward replacement.