Cabinets
Kitchen Cabinet Door Styles, Materials and Finishes
Cabinet doors and drawer fronts make up most of what is visible in a kitchen. The door style also affects price, how easy the cabinets are to clean and how well the finish holds up.
This guide describes the common door styles, how doors sit on the cabinet, the materials they are made from, and the usual finishes. Cost comparisons are relative because pricing differs between cabinet lines.
Common door styles
- Shaker: a flat center panel inside a square-edged frame of four pieces. It suits traditional and modern kitchens and is the most widely sold style.
- Slab or flat panel: a single flat piece with no frame. It is used in modern kitchens and is the easiest to wipe clean.
- Raised panel: a center panel with a shaped, raised profile. It is associated with traditional kitchens and has more edges that collect dust.
- Recessed panel with detail: similar to Shaker but with a bead or molding on the inside edge of the frame.
- Beadboard: a center panel with vertical grooves, used for cottage and farmhouse looks. The grooves need more cleaning.
- Glass front: a frame with a glass insert, clear, frosted or textured. It is usually limited to a few wall cabinets.
- Louvered: horizontal slats. It allows ventilation and is among the most expensive styles to build and to clean.
Drawer fronts can match the doors with a five-piece frame or be flat slabs. Slab drawer fronts are common on narrow or shallow drawers because a framed front leaves little room for a pull.
Overlay types: partial, full and inset
Overlay describes how the door sits relative to the cabinet front.
| Type | Description | Relative cost |
|---|---|---|
| Partial overlay | Door covers part of the face frame, leaving about 1 to 2 inches of frame visible between doors | Lowest |
| Full overlay | Door covers nearly all of the frame or box, with gaps of about 1/8 to 1/4 inch between doors | Moderate |
| Inset | Door sits inside the face frame opening, flush with the frame | Highest |
Inset doors need close tolerances, and wood movement through the seasons can cause them to rub, so they are usually built by semi-custom and custom makers. Frameless cabinets are full overlay by design.
Door materials
Solid wood is the traditional material for door frames and raised panels. Maple, oak, cherry, birch, hickory and walnut are common. Wood expands and contracts across the grain with humidity, so a framed door is built with a center panel that floats in its frame.
MDF is widely used for painted doors. A one-piece MDF Shaker-style door has no joints to crack, and an MDF center panel in a wood frame stays flat. MDF does not accept stain and must be kept sealed against water.
Thermofoil is a vinyl film formed over MDF with heat. It is economical and easy to clean. Its weakness is heat: the film can peel or discolor near ovens, toasters and other heat sources, and manufacturers often recommend heat shields beside a range.
Laminate and melamine doors are flat panels with a durable printed or solid-color surface and edge banding. Wood veneer over a stable core gives slab doors a real wood face with consistent grain. Acrylic and other high-gloss panels are used for modern slab doors and show fingerprints and fine scratches more readily.
Paint, stain and other finishes
Factory finishes are sprayed and cured in controlled conditions and are harder than paint applied on site. Most painted cabinets use a pigmented conversion varnish or a similar catalyzed coating.
Paint gives a uniform color and hides grain. On solid wood doors, hairline cracks in the paint at the frame joints are normal as the wood moves and are not usually treated as a defect. Stain shows the grain and hides small dings and wear better than paint. Glazes and distressed finishes add cost and are harder to touch up or match later.
Sheen matters for upkeep. Matte finishes hide fingerprints less well on dark colors and can burnish where rubbed. Satin is the most common compromise. Ask for a touch-up kit with the order and keep the finish name and code.
Cost and maintenance by style
Within one cabinet line, door style typically moves the price in this order from least to most: slab in laminate or thermofoil, Shaker, detailed recessed panel, raised panel, then inset versions of any of them. Painted finishes usually cost more than stained ones, and glass doors add the cost of finished cabinet interiors and often interior lighting.
For cleaning, flat surfaces are easiest. Shaker doors collect dust and grease on the inside ledge of the bottom rail. Raised panel and beadboard doors have the most profiles to clean. Mild dish soap in water on a soft cloth is the usual cleaning method. Abrasive pads and strong solvents damage most finishes, so follow the manufacturer's care sheet.
Choosing a style for the kitchen
- Look at the house. Door style usually works best when it matches the age and character of the home's trim and interior doors.
- View a full-size sample door, not a small chip, in the kitchen's own light.
- Decide on paint or stain early, since it determines which door materials are suitable.
- Check how the style looks on narrow doors and short drawer fronts, where frames can look heavy.
- Choose hardware with the door. Pulls need a flat area wide enough to mount on.
Common door selection mistakes
- Choosing from a small color chip or a screen image and being surprised by the full kitchen
- Using thermofoil doors next to a range without the recommended heat protection
- Expecting painted solid wood doors to stay free of joint lines
- Selecting a heavily detailed style for a household that does not want extra cleaning
- Mixing too many door styles or finishes in a small kitchen
- Forgetting matching end panels, toe kicks and appliance panels in the order
- Picking a trendy color with no plan for how it will be touched up or refinished
Frequently asked questions
What is a Shaker cabinet door?
A Shaker door has a flat recessed center panel surrounded by a plain square-edged frame made of two vertical stiles and two horizontal rails. It has no added molding or beveling, which is why it fits many kitchen styles.
Are MDF cabinet doors good quality?
For painted doors, MDF is a sound choice and is used in many higher-priced lines because it stays flat and has no grain or joints to show through paint. It should not be used where a stained wood look is wanted, and exposed edges must stay sealed.
Which cabinet door style is easiest to keep clean?
Slab doors, because they have no ledges or grooves. Shaker doors are next. Raised panel, beadboard and louvered doors take the most effort to clean.
Do painted cabinets chip more than stained cabinets?
Chips and wear show more on paint because the color sits on the surface and the wood beneath contrasts with it. Stain penetrates the wood, so small dings are less visible. A factory-applied catalyzed finish resists chipping better than site-applied paint.
Can cabinet doors be replaced without replacing the cabinets?
Yes. If the cabinet boxes are sound, new doors and drawer fronts can be ordered to fit. This is the main part of cabinet refacing. Hinges usually need to be replaced at the same time to suit the new doors.